• FGRP Casing and stainless steel plate heat exchanger
  • Direct coupling fan motor (no pulleys and belts)
  • Corrosion proof
  • Easy cleaning
  • Easy instalation
Model *Dissip.
K.w.

 Empty Weight
Kg.

 Service Weight Kg. Pump Power
Kw.		 Fan Power
Kw.		 Long
mm.		 Width
mm.		 High
mm.		 Dim. Drawing Plane
A-Card		 Technical Feat.
EWK-I 144 185 800 1.350 4,0 2,2 1.725 1.400 2.620seleccionarseleccionar[-]
EWK-I 225 260 1000 2100 5.5 3.0 2060 1520 2620seleccionarseleccionar[-]
EWK-I 324 347 1350 2800 5.5 4.0 2450 1855 2890seleccionarseleccionar[-]
EWK-I 441 520 1500 3850 7.5 5.5 2645 2125 2940seleccionarseleccionar[-]
EWK-I 680 798 2500 6000 15.0 7.5 3895 2625 3920seleccionarseleccionar[-]
EWK-I 900 1040 2600 7800 15.0 11.0 4900 2620 3680seleccionarseleccionar[-]
EWK-I 1800 2080 4900 14600 2x15.0 15.0 5500 4850 4040seleccionarseleccionar[-]
EWK-I 1260 1433 4800 11900 2x15.0 15.0 4280 4875 4000seleccionarseleccionar[-]

* Heat rejection at the following conditions: Tin: 35,0 ºC, Tout: 30,0 ºC, Twb: 24,0 ºC

WORKING PRINCIPLE: CLOSED CIRCUIT COOLER

  • The fluid to be cooled (usually water) flows through the tubes of the coil without coming into direct contact with the external air, preventing dirt or pollution from entering the primary water circuit. The heat is transmitted from the fluid through the tube walls to the water, which is being continuously sprayed over the coil.
  • The fan situated at the top of the tower intakes air in counterflow to the water, thereby evaporating a small part of the re-circulating water, drawing off the necessary heat for evaporation and releasing it into the atmosphere. The rest of the water is re-circulated with a spray water pump from the basin to the spray nozzles. (Secondary circuits). A small quantity of heat is transmitted by convection to the external air, just as for an air cooler.

  1. Sound Attenuator.
  2. Access ladder & Hand rail to the fan motor.
  3. Vibration Switch.
  4. Electric water control level in the Basin .
  5. Winter Pack (Thermostat & immersion heater)
  6. Electric motor frecuency converters.Switch cabinets.
  7. Water treathment systems (Dosing, bleed)